Department of Mechanical Engineering,
Don Bosco College Of Engineering,
Fatorda, Margao,Goa- 403 602.
Tel No : (0832) 2741045/2743944
Fax : (0832)2742648
E-mail: suraj.marathe@dbcegoa.ac.in

He is currently working in Mechanical Engineering department of Don Bosco College of Engineering as assistant professor for the past 8 years and 2 months. Before this, he worked in Industries like Crompton Greaves, Motor division,Kundaim, Godrej and Boyce, Lockes division in various position for 13 years. Visiting Lecturer in Goa University, for MBA for 1 year, Visiting Lecturer for 6 month in Rosary college, Navelim and Visiting Lecturer in GEC, for ME (Industrial) for 6 months.

• Manufacturing, Hydraulics, Automation.
• Quality Engineering, Reliability Engineering.
• Maintenance Engineering.
• Six Sigma and Optimization Studies.
• Operation Management

• ”Implementation of Six Sigma on a Name Plate Machine and Application of MOST”.
• “Process Capability improvement on shell machining machine”.
• “Four wheel steering vehicle”.
• “Optimization of Design and Fabrication of Hydraulic Floor Crane”.
• “ Design and Fabrication of Beach Sand Cleaner”
• “Design and Fabrication of Automated Angle and Height Measuring Fixture for Blade Mounting Brackets of Fans”.
• “Design and Optimisation of Conveyor Belt System”.
• “Design and Fabrication of Glass Powdering and Grading Machine for Various Industrial Application”.
• “Design and Fabrication of Break Operated In- Built Hydraulic Jack Mechanism for Automobile”.
• “Six Sigma Approach to Improve Solidification Process Parameters in High Pressure Die Casting Using Simulation:.
• ‘Energy Audit (Level-1) of Cooling Tower at Zuari Agro Chemicals Limited to Suggest Design Recommendation”.
• “Analysis and Optimisation of PT parameters in a Hydraulic Die Casting Process”.
• “Reduction of Cycle Time and Man Power of Tyre Venting Process by Using Automation in MRF PVT LTD”.

• 1-week FESTO sponsored on “Introduction to Electro pneumatics” at Mumbai from 11th to 15th March 2002
• 2 week Accenture sponsored on “BasicMOST Applicator” at Mushi from November 2008
• 1 Week ISTE sponsored  STTP on “Computer Application in Design and Manufacturing”  at Don Bosco College of Engineering, Fatorda from 20th to 24th May 2013.
• 2 Week AICTE sponsored  STTP on “Industrial Application for Mechatronics”  at Agnel Polytechnic, Verna from 16th to 29th December 2013.
• 2 Weeks TEQIP II sponsored STTP on “Concepts and Advances in Quality and Reliability Management” at GEC from 17th to 28th November 2014.
• 1 Week TEQIP II- ISTE sponsored STTP on “Computer-Aided Engineering Analysis” at Don Bosco College of Engineering, Fatorda, from 4th to 8th January 2016.
• 1 Week STTP on “Internet Of Things (IOT) & its Application in Industry” at Ramrao Adik Institute of Technology, Nerul, Mmumbai and B&R Automation Pvt Ltd Pune, from 8th June to 12th June 2020.
• 1 Week STTP on “Industry- Institute Interaction in Modern Aerospace Engineering: Marching towards Self Reliance”, from 15th July to 20th July,2020.
• 1 Week STTP on “Additive Manufacturing for Medical and Aerospace Applications” Shri Vishnu Engineering College, Department of Mechanical, 4th to 9th Jan, 2021
• 1 Week FDP on “Evolving Trends in Research” at Agnel Institute of Technology and Design”, 24th to 28th August 2020.
• 1 Week TEQIP-3,“Advances in materials and Machining process for recent industrial applications” Veer Surendra Sai University of Technology, Burla, Department of Production Engineering, 7th to 11th Sept, 2020
• 1 Week ISTE, “Recent Advances in RFand Microelectronics”, at Don Bosco College of Engineering Department of Electronics and Telecommunication Engineering,31st Augst to 4th Sept 2020.

• 1 Week workshop on “Maintenance Engineering”.
• 1 Week ISTE Short Term Training Programme on “Industrial Automation and Process”
• 3 Day workshop on “Six Sigma” in association with DBTech .
• Online Innovation and Start up Webinars for the Students.

• Kudav.R, Mascarenhas Z, Kamat S., Mendonca R., Vaigankar K., Marathe  S.,             ”Design and Optimisation of Conveyor Belt System in Zuari Agro Chemical Industry”, International Journal of Engineering Research in Mechanical and Civil Engineering (IJERMCE), Special Issue, pp. 165-169.
• Sairaj Gauns, Nithin Rajmohan, Khandeparkar Suyash, Raesh Kumar, Amey Tari, Suraj Marathe,” Design and Fabrication of Automated Angle and Height Measuring Fixture for Blade Mounting Brackets” International Journal of Engineering Research in Mechanical and Civil Engineering (IJERMCE), Special Issue, pp. 108-116.
• Kamat Sangeeta,Marathe Suraj, Mariappan V, Sakhardande M.J, Sawant Vijayanand, “Process Capability Improvement of a Reconditioned Auto Lathe Machine: A six Sigma Approach”, 4th International Conference on Quality, Reliability and Infocom Technology (ICQRIT),18/19 Dec 2002.
• Suraj Marathe, Carmo Quodros, “Analysis and Optimization of PT Parameters in a Hydraulic Die Casting Process”, 5th International conference on Industrial Engineering ( ICIE- 2019) SV, NIT  Surat, 12/14 Dec 2019, pp. 577-580.
• Suraj Marathe, Carmo Quodros, “ Thermal Factor of Aluminium High pressure Die Casting Container (Mould) to achieve Six Sigma Quality of Castings”, International journal of engineering research & technology, Volume 9, Issue 4 , pp. 159-168,April – 2020
• Vibhav Chari, Mukesh Guuadamani, Jerry Vaz, Saindra Naik, Mahanand Kumbhar, Suraj Marathe, “Design and Fabrication of Automated Booth for Versatile Welding Operations”, International Journal of Modern Trends in Engineering and Research, Volume 07, Issue 06, pp. 1-13, 14 June 2020.
• Gaad Shivdas, Halanekar Rajat, Rajat Naik, Ranjeet Naik, Suraj Marathe, “ Design and fabrication of glass powdering and grading machine for various industrial applications”, International Journal of Innovative Research in Science, Engineering and Technology, Vol. 9, Issue 6, June 2020.
• Suraj Marathe, Carmo Quodros, “ Analysis and optimization of high pressure die casting parameters to achieve six sigma quality product using a numerical simulation approach”, International Journal of Engineering and Management Research, page No. 97-109, Vol. 11, Issue 01, Feb 2021, https://doi.org/10.31033/ijemr.11.1.15, 2394-6962
• Suraj Marathe, Carmo Quodros, “ Six Sigma (DMAIC) approach to optimize operation variables in high pressure die casting”, International Journal of Manufacturing and Materials Processing, page No.22-51 Vol. 6, Issue 2, Aug,2020, 2582-5046, https://doi.org/10.37628/ijmmp.v6i2.1102
• Suraj Marathe, Carmo Quodros, “ Thermal Hot Spot Prediction in High Pressure Die Casting by Determination of Chvorinovs Rule Shape Constant”, Material Todays Proceedings, https://doi.org/10.1016/j.matpr.2021.03.606.
• Suraj Marathe, Carmo Quodros, “ Optimization of High Pressure Diecasting process parameters to achieve minimum solidification time using ProCast simulation”, National conference on advances in materials, manufacturing and simulation (AMMS-2020), 26/27 Nov 2020
• Suraj Marathe, Carmo Quodros, “ Thermal Hot Spot Prediction in High Pressure Die Casting by Determination of Chvorinovs Rule Shape Constant”, 3rd International e-Conference on Frontiers in Mechanical Engineering and nanoTechnology  ICFEMT-2020, 27/28 Nov 2020.
• Sairaj Gauns, Nithin Rajmohan, Khandeparkar Suyash, Raesh Kumar, Amey Tari, Suraj Marathe, “ Design and Fabrication of Automated Angle and Height Measuring Fixture for Blade Mounting Brackets”, National Conference on Advances in Civil and Mechanical Engineering
• Kudav.R, Mascarenhas Z, Kamat S., Mendonca R., Vaigankar K., Marathe  S, “ Design and Optimization of Conveyor Belt System in Zuari Agro Chemical Industry”, National Conference on Advances in Civil and Mechanical Engineering
• https://scholar.google.com/citations?user=Li_rtcQAAAAJ&hl=en

9.00 am To 5.00 pm [on prior appointment]

• Workshop
• Engineering Measurement and Metrology
• Engineering Material Science